Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Initial setting
:
1st byte
: Unit (1 to 4)
2nd byte
: Channel name (A to J)
3rd byte
: E
4th byte
: F (For an overflow alarm)
O (For a non-overflow alarm)
Initial setting
:
Outputting according to the mode 1 format (statistical calculations) of the digital printer
P40 (P40 is sold separately).
Note
• Whether to output the data for each channel following a space or to divide it with the
delimiter is selected by the initial setting. (Refer to P22, step 8.)
• The unit number cannot be omitted even when not using link connection.
3. Example of data transmission
External device → display unit
To preset 123.456 for A channel
1AP=123.456
C
L
R
F
Display unit → external device
1 When the "1Ar" command is received:
During normal operation
(Output the A channel value of 123.456)
When an alarm is triggered : 1AE
2 When the "R" command is received:
During normal operation :
(a) 1A–123.456M1B+678.912
C
L
(b) 1A–123.456
R
F
(Output the A channel value of –123.456 and the B channel value of 678.912)
When an alarm is triggered :
C
L
(a) 1AEM1BE
R
F
C
L
C
(b) 1AE
1BE
R
F
R
(a) or (b) can be chosen with the initial settings.
(Refer to P20 "5-1-3. RS-232C settings".)
* M means a space.
* This example shows the case where only one counter board is connected.
: 1A+123.456
C
L
R
F
C
L
R
F
C
L
R
F
C
L
1B+678.912
R
F
L
F
55
Werbung
Kapitel
Inhaltsverzeichnis
