Using The Footswitch - Stryker Crossfire Bedienungsanleitung

Shaver Hand Controls

Using the Footswitch

The RF and shaver handpieces can also be controlled by the Crossfire™
Footswitch. The default footswitch controls are shown below. To customize
button assignments, contact your Stryker representative.
Note: For more detailed information on the Crossfire™ Footswitch, consult the
Crossfire™ Footswitch User Guide (English: 1000-401-032; International: P11345).
Note: To keep the footswitch clean during use, Stryker recommends using
disposable bags (P/N 0277-500-100). Contact your local Stryker representative
for ordering information.
EN-28
Default 1
1. Oscillate
(one-touch)
1
2. Forward
2
(one-touch)
3
3. Reverse
(one-touch)
Default 2 /
None
Activate
Select Mode:
Oscillate
or Forward
/Reverse
Forward/
Reverse
Default 3
Oscillate
(one-touch)
Jog
Forward
(one-touch)