Stryker Crossfire Bedienungsanleitung Seite 25

Adjusting User and System Settings
User Preference Settings
User preferences, such as power and cutting speeds and button assignments for
the handpiece and footswitch, can be adjusted through the Crossfire™ interface.
Select from the default settings provided with the console, or contact your
Stryker representative to customize your own.
1. Press
2. Press
default setting.
3. Press
selection and exit.
Or, press
selection.
Note: User preference settings will not take effect unless a disposable attachment
is connected to the shaver.
Note: When using small-joint handpieces, system defaults will take effect (see
"Default Shaver Controls"). No user preferences can be applied.
.
to select a
to confirm
to cancel
DEFAULT
SMITH KNEE
SMITH SHLDR
EN-21