Operation; The Crossfire™ Interface - Stryker Crossfire Bedienungsanleitung

Operation

The Crossfire™ interface displays system status, enables you to choose between RF
and shaver modes, and enables you to adjust power and speed settings.
Activating the actual handpieces is performed through controls on the handpiece
and on the Crossfire™ Footswitch.
Warning The Crossfire™ system is intended for use only by licensed
medical professionals, properly trained in the use of
electrosurgical equipment and techniques. The Crossfire™
system generates potentially hazardous levels of energy that
can result in injury or even death if improperly used.
Before using the Crossfire™ system in an actual procedure,
verify that each component is installed and functioning
properly. Improper connection may cause arcing or
malfunction of the handpiece or console, which can result
in injury, unintended surgical effect, or product damage.
During use, operators should wear standard surgical gloves
to help reduce the risk of electric shock.
EN-19