Technical Specifications; Environmental Specifications; Electrical Specifications; Generator Output - Stryker Crossfire Bedienungsanleitung

Technical Specifications

Stryker Endoscopy reserves the right to make improvements to the product(s)
described herein. Product(s), therefore, may not agree in detail to the published
design or specifications. All specifications are subject to change without notice.
Please contact the local Stryker Endoscopy distributor or call your local Stryker
Endoscopy sales representative or agent for information on changes and new
products.
Dimensions
Size:
Weight:

Environmental Specifications

Operating temperature:
Operating humidity:
Shipping temperature:
Shipping humidity:
System Input Power Requirements
Voltage:
Inlet Fuse:

Electrical Specifications

Motor output max speed: 12000 RPM
Motor duty cycle:
RF output waveform:

Generator Output

Output power at each set point with specified load resistance (per IEC 60601-2-2,
sub clause 6.8.3) is given in the graphs below.
16.9" L × 12.5" H × 4.5" W
20 lbs
5 – 40°C
30 – 95% RH
-18 – 60°C
15 – 90% RH
100-240 VAC @ 50/60Hz, 6 – 10 A
F 16.0AH, 250V
Continuous operation
200 kHz ± 1%, square wave,
Crest factor <1.5 @ 200 ohms
EN-37