Remote Menu Screen - JVC BD-X200E Bedienungsanleitung

Parameter Possible settings
INTRODUCTION
TITLE
INTRo
BACK
bACK

REMOTE MENU Screen

The following table identifies and describes the parameters that may be set using the REMOTE MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
REMOTE SELECT
9PIN(MASTER)
9PIN(PLAY)
9PIN(REC)
DV(MASTER)
DV(SLAVE)
DV(TRIGGER)
REMoTE
REC CONTROL
REC
REM FF/REW [FF/REW]
MODE SEARCH
SEARCH
MENU
Select whether to create an introduction title (opening movie) in a completed disc
[OFF]
(finalized disc). This is set before inserting a disc or when a blank disc is inserted. If
ON
recorded with this item set to ON, title 1 will be recorded as the introduction title.
[oFF] OFF : Do not create an introduction title.
ON : An introduction title is created when finalizing.
oN
* If this item is set to ON, a disc with only title 1 recorded cannot be finalized.
This button is used to return to the RECORDER MENU (1/2) screen.
[OFF] This parameter is used to select a method for controlling external devices connected
via the RS-422A REMOTE terminal or the DV IN/OUT terminal).
OFF
9PIN(MASTER) : This setting is made when recording audio and video from a VCR
9PIN (PLAY)
9PIN (REC)
[oFF]
9PNM
9PNP
9PNR DV(MASTER) : This setting is made when recording audio and video from a DV
dVM
dVS
dVT
DV(SLAVE)
DV(TRIGGER) : This setting is made when the BD-X200 is connected to a DV
Note
When setting this item to 9PIN (MASTER), DV (MASTER), 9PIN (REC) or DV
(SLAVE), the video output image becomes the REMOTE CONTROL screen display.
However, video input can be checked by press and holding the REC button while
DVD Recorder is stopped and viewing the encode output.
[OFF]
This parameter is used to indicate whether or not the REC CONTROL panel is to be
ON
displayed on the monitor screen.
ON : The REC CONTROL panel is to be displayed only when a recordable disc
[oFF]
has been inserted and the DVD recorder is in Stop, Recording, or Recording
oN
Pause mode.
OFF : The REC CONTROL panel not to be displayed.
This parameter is used to select the command output via the RS-422A REMOTE
terminal or DV terminal when the FF or REW button is pressed on the REMOTE
CONTROL (9PIN MASTER/DV MASTER) screen.
[F R]
FF/REW : A FF or REW command is to be output accordingly.
SEA
SEARCH : A forward-search or reverse-search command is to be output accordingly.
This button is used to return to the Setup Menu screen.
Description
Description
: Control is not to be carried out via the RS-422A REMOTE terminal
or the DV IN/OUT terminal. This is the standard setting for normal
operation.
connected to the RS-422A REMOTE terminal. When selected,
the REMOTE CONTROL (9PIN MASTER) screen appears, and
this screen can be used to carry out recording operations.
: Use this setting to use this machine as a player under RS-422
control.
: Use this setting to record images and sound from a non-linear
editor. The REMOTE CONTROL (9PIN REC) screen is displayed.
This machine becomes the slave side, controlled by the non-linear
editor.
camera or video connected to the DV IN/OUT terminal.
When selected, the REMOTE CONTROL (DV MASTER) screen
appears, and this screen can be used to carry out recording
operations.
: This setting is made when recording audio and video from a
nonlinear editor connected to the DV IN/OUT terminal. When
selected, the REMOTE CONTROL (DV SLAVE) screen appears.
In addition, the BD-X200 will become the slave device and will be
controlled by the non-linear editor.
camera featuring a DV record triggering function, and it allows
this DVD recorder to record video from the camera in response to
operation of its trigger button.
E-91