System Menu Screen - JVC BD-X200E Bedienungsanleitung

SYSTEM MENU Screen

The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
TEST SIGNAL
TEST S
FACTORY [CANCEL]
SETTING EXECUTE
FACTRY
KEYBOARD [ENGLISH]
STYLE FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
KboARd
EDIT MENU [ENABLE]
DISABLE
EdIT
TOTAL RECORDING TIME
—
MENU
This parameter is used to indicate whether or not the colour bar output by the DVD
[OFF]
recorder's internal signal generator is to be displayed.
ON
OFF : The colour bar is not displayed and video from the VIDEO LINE IN terminal
is output to the monitor.
ON : The colour bar is displayed. Use this setting when the colour bar is to be
[oFF]
recorded.
oN
This parameter is used to indicate whether or not all setup menu parameters are to
be returned to their default settings.
CANCEL : Default settings are not to be restored.
EXECUTE : Default settings are to be restored.
[CAN]
EXE
This parameter is set when using a USB keyboard, and its purpose is to indicate the
keyboard's layout (or language) as one of the following.
ENGLISH
FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
[ENG]
Note
FRN
ITL
The system must be restarted after this parameter is changed.
GER
ESP
JPN
This parameter is used to indicate whether or not a screen for editing the title and
chapter menus is to be displayed when title closing or finalizing is performed.
ENABLE : The menu editing screen is to be displayed.
Upon title closing, the THUMBNAIL EDIT screen will be displayed for
[oN]
the corresponding chapter menu. (☞ Page 49)
oFF Upon finalizing, the TITLE MENU EDIT screen will be displayed for the
title menu. (☞ Page 55)
DISABLE : The menu editing screen is not to be displayed.
— This button displays the total time for recording and erasing operations. (xHour xxMin)
—
This button is used to retu4rn to the Setup Menu screen.
Description
E-87