JVC BD-X200E Bedienungsanleitung Seite 67

How to operate the REMOTE CONTROL (9PIN/DV MASTER) screen
Operate the REMOTE CONTROL (9PIN MASTER / DV MASTER) screen from the keyboard.
Keyboard: Make selections with the cursor keys († / © / ∞ / √), then press Enter to confirm or execute.
The cursor can be moved with mouse operations.
* When the REMOTE CONTROL screen is displayed, operation of the FWD, REV, PLAY, REC, PAUSE, MENU, and TOP MENU
buttons of this machine is not accepted.
Operation example: Change the ACTION item setting of event no. 1 from PAUSE to STOP.
Press the cursor keys († / © / ∞ / √) to move the cursor to the ACTION item of event no. 1.
1.
2.
Press the "Enter" key.
● The current setting value of the ACTION item (PAUSE) is underlined. (The setting of an item can be changed when it is
underlined.)
Press the cursor keys († / © / ∞ / √) to select the setting value STOP.
3.
4.
Press the "Enter" key.
● The underline disappears, and the ACTION item setting value changes to STOP.
VCR control buttons
Controlling the VCR playback operations
The VCR is controlled using the VCR control button on the REMOTE CONTROL screen. Select the operation button, press the
"Enter" key, and the VCR starts to operate. This machine is not controlled.
e : Eject u : Fast reverse or fast-reverse play
y : Fast forward or fast-forward play
* The action to be taken by the DVD recorder in response to pressing of the y or u button (i.e., FF/REW or SEARCH) is
selected using REM FF/REW MODE from the REMOTE MENU screen.
Changing the monitor screen to the EE screen
Press the "R" key on the keyboard to go to the EE screen. When pressed the second time, the display returns to the REMOTE
CONTROL screen.
Keyboard shortcut operations
Cursor († / © / ∞ / √) and Enter keys: Moves the cursor and confirms.
"|" : IN point registration (registers the current source time code in the final event).
"O" : OUT point registration (if an IN point is registered in the final event, the current source time code is registered).
"DEL" : Deletes the event line at the position of the cursor.
"SHIFT+DEL" : Deletes all events.
"INS" : Moves the events after the cursor position down by 1, and allows an event to be registered in the space vacated.
"SPACE" : Carries out the edit start/finish operation.
"R" : Toggles the screen between EE and REMOTE. (Toggle operation)
The following keys control the VCR playback operation. (These can be used even when the "R" key is pushed and the EE screen
is displayed.)
"S" : Fast-reverse/Fast-reverse playback
"H" : Fast-forward/Fast-forward playback
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1
01 01 00 00 00 00 : : : 00 01 00 00 :
2
: : : :
3 : : : :
TOTAL DURATION
CHAPTER MANUAL
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
CANCEL
TC EDIT/END
SOURCE TIMECODE
"D" : Stop
"V" : Frame-reverse playback
ACTION MENU
: : PAUSE 00
: :
: :
00h 00m 00s
000 min
FINALIZE
: : :
00 01 00 00
q : Stop t : Play
: Frame-Reverse play
"F" : Playback
PAUSE
PAUSE
Underline
STOP
STOP
w : Pause
: Frame-advance play
"G" : Still
"B" : Frame-advance playback
E-65