Registering The In Point, Out Point, And Chapter Marks; Deleting The In Point, Out Point, And Chapter Marks - JVC BD-X200E Bedienungsanleitung

1. Registering the In Point, Out Point, and Chapter Marks

Use the keyboard to directly enter the In Point, Out Point, and chapter marks.
Registering chapter marks : In order to register chapter marks using the REMOTE CONTROL screen, it will first of all be necessary
Chapter mark
IN POINT
REMOTE CONTROL SCREEN ( DV SLAVE )
EXIT IN POINT 00:00:00:00
: : :
h m s f
1 00:00:00:00 2 00:15:00:00
4 00:25:00:00 5 00:30:00:00
7 8
00:40:00:00 00:45:00:00
CHAPTER MANUAL
ADJ
BITRATE 8.0 Mbps
EDL
TC CANCEL

2. Deleting the In Point, Out Point, and Chapter Marks

REMOTE CONTROL SCREEN ( DV SLAVE )
EXIT IN POINT 00:00:00:00
: : : : :
h m s f h m s
1 00:00:00:00 2 00:15:00:00
4 00:25:00:00 5 00:30:00:00
7 00:40:00:00 8 00:45:00:00
CHAPTER MANUAL
ADJ 8.0 Mbps
BITRATE DISC REMAIN
EDL
TC CANCEL
TC CANSEL
3. Setting the Optimum Bit Rate
REMOTE CONTROL SCREEN ( DV SLAVE )
IN POINT 00:00:00:00
EXIT
: : : : : :
h m s f h m s
1 00:00:00:00 2 00:15:00:00
4 5
00:25:00:00 00:30:00:00
7 00:40:00:00 8 00:45:00:00
CHAPTER MANUAL
ADJ
ADJ BITRATE 8.0 Mbps DISC REMAIN
EDL
TC CANCEL
to set CHAPTER CREATION from the RECORDER MENU (2/2) screen to MANUAL. If this parameter
is set to AUTO, chapter marks will be automatically setup at specific intervals. The current setting for
CHAPTER CREATION is indicated in this screen's CHAPTER field.
OUT POINT
OUT POINT 00:10:00:00
: : : : : :
h m s f h m s f
3 00:20:00:00
6 00:35:00:00
9
00:50:00:00
000 min
DISC REMAIN
FINALIZE
OUT POINT 00:10:00:00
: : : :
f h m s f
3 00:20:00:00
6 00:35:00:00
9 00:50:00:00
000 min
FINALIZE
ADJUST can be used to set the optimum bit rate (i.e., the amount of data per
OUT POINT 00:10:00:00
second) for the remaining space on a disc based on the recording time (or duration)
: : :
f h m s f
3 00:20:00:00 between the In Point and the Out Point.
6
00:35:00:00
● DISC REMAIN displays an estimate of the available space for recording on the
9 00:50:00:00
current disc.
000 min
● BIT RATE displays the current bit-rate setting.
FINALIZE
To set the bit rate that best suits the remaining disc capacity, select ADJ and
then press the SET button.
Procedure
q Press the cursor keys (†, ©, ∞, √) to move the cursor to the
point you want to set (IN POINT, OUT POINT, or chapter point),
then press the "Enter" key.
● The column for the selected point will be underlined.
00:00:00:00
∞
Underline
w Enter the time code from the keyboard (hour: minute: second:
frame).
e Press the "Enter" key.
● The underline at the selected point will disappear, and the time
code will be set.
● When a time code is registered for a chapter mark, the chapter
list will be sorted from the smallest time-code values, and the
newly registered point will be highlighted.
q Press the cursor keys (†, ©, ∞, √) to move the cursor to the
point you want to delete (IN POINT, OUT POINT, or chapter point),
then press the "Enter" key.
w Press the cursor keys (†, ©, ∞, √) to move the cursor to the TC
CANCEL item on the screen, then press the "Enter" key.
● The selected point (i.e., In Point, Out Point, or a chapter mark
from the chapter list) will be deleted.
● Whenever a chapter mark is deleted, the chapter list will be
sorted.
E-75