Registering In/Out/Chapter Point From External Edit Lists - JVC BD-X200E Bedienungsanleitung

Registering IN/OUT/CHAPTER POINT from external edit lists

External edit lists can be read by the EDL MANAGER screen of this machine, and used as edit data in the REMOTE CONTROL
screen.
Notes
● Loading of external edit lists is possible when CHAPTER CREATION from the RECORDER MENU (2/2) screen is set to
MANUAL.
● EDL that can be read in : In SLAVE mode CSV files or Sony9100 format files.
● Chapter marks are inserted at GOP intervals (i.e., 15 frames). It will not be possible to insert chapter marks that are closer
together than this interval.
EDL MANAGER
BACK
EDL01
EDL02
EDL03
EDL04
EDL item
EDL05
EDL06
EDL07
M EDL08
EDL09
S
EDL10
SAVE LOAD
IMPORT DELETE
LOAD item
IMPORT item
Example 1: Loading a CSV-format EDL (Slave mode)
JVC CSV
00:00:00:00
IN POINT
01:00:00:00
OUT POINT
00:10:00:00
Chapter1
00:20:00:00
Chapter2
00:30:00:00
Chapter3
00:40:00:00
Chapter4
00:50:00:00
Chapter5
● Line returns at the end of each line.
● Maximum of 98 chapter marks.
Example 2: Loading a Sony9100-format (Slave mode)
Recorder-In and Recorder-Out time codes are read from the X-source and Y-source rows, and these are then set as the
In Point, Out Point, and chapter marks for editing.
IN point register
EDIT RECORDER-IN RECORDER-OUT
0001 00:00:00:00
0002 00:10:00:00
00:20:00:00
0002
0003 00:30:00:00
00:40:00:00
0004
0004 00:40:00:00
0005 00:50:00:00
0005 00:50:05:00
Already registered Register in
CHAPTER point
In MASTER mode CSV files only. CSV files have the same name for the MASTER or SLAVE
modes, but the files are not compatible. Use the correct format files. (Refer to page 70 "Details of
the MASTER mode CSV files")
Operation
To enter the state where edit lists can be transferred to the BD-
X200.
1.
Move the cursor to the EDL item you wish to register on the EDL
MANAGER screen, then press the "Enter" key.
● The selected EDL item will be highlighted.
NAME
2.
Move the cursor to the IMPORT item on the EDL MANAGER screen,
then press the "Enter" key on the keyboard.
● The external edit list will be read into the EDL MANAGER screen.
3.
To use the read edit list, select the LOAD item on the EDL MANAGER
screen, and press the "Enter" key.
● The edit list is set in the REMOTE CONTROL screen.
EDL MANAGER screen
BACK
M
S
SAVE
IMPORT
IMPORT item
CHAPTER point register
BACK
00:10:00:00
00:20:00:00
00:20:00:00
00:40:00:00
00:50:00:00
00:50:00:00
01:00:00:00
Register in
01:00:00:00
OUT point
IMPORT item
EDL MANAGER
EDL01
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
EDL09
EDL10
LOAD NAME
DELETE
LOAD item
EDL MANAGER screen
EDL MANAGER
EDL01
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
M EDL08
S EDL09
EDL10
SAVE LOAD NAME
IMPORT DELETE
LOAD item
REMOTE CONTROL screen
REMOTE CONTROL SCREEN ( DV SLAVE )
EXIT IN POINT 00:00:00:00 01:10:00:00
OUT POINT
: : : : : : : : :
h m s f h m s f h m s f
1 00:10:00:00 2 00:20:00:00 3 00:30:00:00
4 5 6
00:40:00:00 00:50:00:00 : : :
7 : : : 8 : : : 9 : : :
CHAPTER MANUAL
000 min
ADJ BITRATE 8.0 Mbps DISC REMAIN
EDL FINALIZE
TC CANCEL
REMOTE CONTROL screen
REMOTE CONTROL SCREEN ( DV SLAVE )
EXIT IN POINT 00:00:00:00 OUT POINT 01:00:00:00
: : : : : : : : :
h m s f h m s f h m s f
1 00:10:00:00 2 00:20:00:00 3 00:30:00:00
4 5 6
00:40:00:00 00:50:00:00 00:50:05:00
7 8 9
: : : : : : : : :
CHAPTER MANUAL
ADJ 8.0 Mbps 000 min
BITRATE DISC REMAIN
EDL LOAD FINALIZE
TC CANCEL
E-71