Saving And Reading Edit Lists On The Edl Manager Screen - JVC BD-X200E Bedienungsanleitung

Saving and Reading Edit Lists on the EDL MANAGER Screen

How to operate the EDL MANAGER screen and its contents
The EDL MANAGER screen is for registering edit lists (EDL). Event data from the REMOTE CONTROL screen of this machine can
be saved as edit lists in the EDL MANAGER screen. Also, edit lists registered on the EDL MANAGER screen can be read into the
event register list of the REMOTE CONTROL screen.
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT ACTION
1 : : : : : : CHAPTER
01 01 00 00 00 00
2
01 02 00 01 30 00 : : : : : : CHAPTER
3 : : : : : :
01 03 00 02 30 00 00 03 30 00 STOP
CHAPTER MANUAL TOTAL DURATION
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
CANCEL EDIT/END
TC
SOURCE TIMECODE
Notes
● If a file is registered in the EDL item, the
characters are blue.
● In the case of an edit list for MASTER, "M" is
displayed before the EDL item. In the case
of an edit list for SLAVE, "S" is displayed
before the EDL item.
To display the EDL MANAGER screen
Select the EDL item on the REMOTE CONTROL screen, then press the
"Enter" key on the keyboard.
MENU
00
00h 03m 30s
030 min
EDL item
FINALIZE
: : :
00 03 30 00
3.
1.
2.
Method of operation
Select the EDL item to be used, next select the function item, then execute.
(Example: Save the current setting value of the REMOTE
CONTROL screen as EDL08.)
1.
2.
3.
EDL MANAGER screen
EDL MANAGER
BACK
EDL01
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
M
EDL09
S
EDL10
SAVE LOAD
IMPORT DELETE
Select the EDL item to be used (EDL08).
Place the cursor on the EDL08 item and press the "Enter" key on the
keyboard.
● The EDL08 item is displayed as highlighted.
Move the cursor to the SAVE item, and press the "Enter" key.
● The event data of the REMOTE CONTROL screen is saved in EDL08.
To finish operations on the EDL MANAGER screen select the
BACK item, and press the "Enter" key.
● The display returns to the REMOTE CONTROL screen.
EDL item
NAME
Function item
E-69