JVC BD-X200E Bedienungsanleitung Seite 92

Setup Menu
RECORDER MENU Screen (continued)
RECORDER MENU (2/2) screen
Parameter Possible settings
Y/C TERMINAL
MODE
Y C TM
THUMBNAIL
FORM
THUMb
[1,2ch † 1,2ch]
AUDIO
3,4ch † 1,2ch
CHANNEL (DV)
dV CH
AUDIO REC VOLUME
MODE INDEPENDENCE
VRModE
DISC IN ACTION
dISCIN
TITLE END
TI ENd
DVD MENU [TOP+MENU]
TYPE
MENU T
E-90
S1 This parameter is used to set the specification for the DVD recorder's VIDEO Y/C
[S2] INPUT terminal in order to enable the recording of wide-screen discrimination signals.
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio and squeezed video is to be recorded.
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
S1
[S2] Squeezed video : 16:9 wide-screen content with the left and right sides
Letterbox video : Content with the top and bottom of the screen blackened out.
[NORMAL] Thumbnail creation method for chapter and title menus during wide-signal recording
V-CUT is selected.
H-CUT NORMAL : The input signal is to be converted into thumbnails without modification.
V+H CUT
V-CUT
[NoR]
VCUT H-CUT
HCUT
V+H V+H CUT : In this case, the top, bottom, left, and right of the video content is to be
This parameter is to be set when recording an audio signal from the DV IN/OUT
terminal.
Specifically, it indicates whether the signals from channels 1 and 2 or from channels
[1 2] 3 and 4 are to be recorded. (Only available for 32 kHz)
1,2ch † 1,2ch : Channels 1 and 2 are to be recorded.
3 4
3,4ch † 3,4ch : Channels 3 and 4 are to be recorded.
[BOTH] This parameter is used to select the method for adjustment of audio recording levels.
Specifically, both channels can be adjusted while maintaining the same level, or
each channel can be adjusted independently.
[boTH] BOTH
INdE
INDEPENDENCE : Both channels are to be adjusted independently.
[MENU] Select the action when a completed disc (finalized disc) is inserted into this machine
TITLE or a DVD player.
This is set before inserting a disc or when a blank disc is inserted.
[MENU] MENU : Displays the TOP MENU (title menu)
TITL TITLE : Starts to playback TITLE1
[MENU] Select the action to be taken when playback within a title of a completed disc (finalized
REPEAT disc) is finished. This is set before inserting a disc or when a blank disc is inserted.
STOP MENU
NEXT TITLE REPEAT : Repeat playback within a title.
STOP
[MENU] NEXT TITLE : Start to playback the next title. In the case of playback of the final title,
REPT
SToP
NEXT
Select whether to create a TOP MENU or MENU in a completed disc (finalized disc).
TOP This is set before inserting a disc or when a blank disc is inserted.
NONE TOP+MENU: When finalizing a TOP MENU is created.
When closing a title a MENU is created.
[T+M] TOP
ToP
NoNE NONE
Description
compressed for normal aspect screens.
If the input video has an aspect ratio of 4:3, the corresponding thumbnails
are also to have this aspect ratio.
: In this case, the top and bottom of the video content is to be removed to
form thumbnails.
: In this case, the left and right of the video content is to be removed to
form thumbnails. (SQUEEZE)
removed to form thumbnails. (LETTER BOX)
: Both channels are to be adjusted while maintaining the same
level.
: Display the TOP MENU (title menu)
: Enter stop mode. The TOP MENU is not displayed.
start to playback the first title.
: When finalizing a TOP MENU is created.
When closing a title a MENU is not created.
: Neither a TOP MENU nor a MENU is created. The disc will be without a menu.