JVC BD-X200E Bedienungsanleitung Seite 38

Settings & Controls for Recording
Setting the Encoding Format for Audio & Video (continued)
Audio Encoding
AUDIO ENCODE
This parameter is used to set the encoding format for audio data.
LPCM : Linear PCM encoding
DOLBY DIGITAL : Dolby AC3 encoding.
MPEG : MPEG encoding.
Notes
● If the SET UP button is pressed while in Recording mode, the video bit-rate setting and audio encoding format will be
displayed on-screen. Press the SET UP button once again to hide this information.
● When recording a music source it is recommended that the setting is either DOLBY DIGITAL or LPCM.
For MPEG, there can be deterioration in the sound quality, depending upon the compression characteristics.
Guide to Recording Times
The time available for recording on a disc will depend on the video encoding bit rate and audio encoding format that have been set.
Furthermore, the more titles a disc contains, the less time will be available for recording. Use the following table as a guide to the
amount of time available for recording.
Audio encoding format
DOLBY DIGITAL
MPEG
LPCM
E-36
9 Mbps 8 Mbps
62 min. 69 min.
63 min. 70 min.
— —
Encoding bit rate
7 Mbps 6 Mbps
78 min. 89 min. 104 min.
79 min. 91 min. 107 min.
68 min. 77 min.
5 Mbps 4 Mbps
126 min. 160 min.
130 min. 167 min.
88 min. 102 min.
3 Mbps 2 Mbps
218 min.
231 min.
— —