Remote Menu Screen - JVC BD-X201MS Bedienungsanleitung

REMOTE MENU Screen

The following table identifies and describes the parameters that may be set using the REMOTE MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
REMOTE MENU (1/2) screen
Parameter Possible settings
REMOTE SELECT
DV(TRIGGER)
REMoTE
FOOT SW1
FSW1
FOOT SW2
FSW2
232C BAUDRATE
bPS
232C
PROTCOL TYPE
232C
r
REM2
MENU
MENU
[OFF] This parameter is used to select a method for controlling external devices connected via the DV
IN/OUT terminal.
DV(SLAVE)
OFF
DV (SLAVE)
[oFF]
dVS
DV(TRIGGER)
dVT
[OFF] Set this item when connecting an external switch (foot switch, etc.) to the FOOT SW1 terminal.
OFF
LOW EDGE
LOW EDGE
HIGH EDGE
LOW LEVEL
HIGH EDGE
[oFF]
LE
LOW LEVEL
HE
LL
[OFF]
Set this item when connecting an external switch (foot switch, etc.) to the FOOT SW2 terminal.
OFF
LOW EDGE
LOW EDGE
HIGH EDGE
BOTH EDGE
HIGH EDGE
[oFF]
LE
HE
BOTH EDGE
bE
[9600]
For setting the communication speed of the RS-232C terminal.
9600
19200
19200
[96]
192
[TYPE1]
This item does not work for the DVD recorder.
to
TYPE8
[T1]
to
T8
This button is used to display the REMOTE MENU (2/2) screen.
This button is used to return to the Setup Menu screen.
Description
: Control is not to be carried out via the DV IN/OUT terminal. This is the stan-
dard setting for normal operation.
: This DVD recorder will become the slave device and will be controlled by
the master device.
: This setting is made when this DVD recorder is connected to a DV camera
featuring a DV record triggering function, and it allows this DVD recorder to
record video from the camera in response to operation of its trigger button.
: Set to this when an external switch is not used
: Switch between recording and record pause actions using the low edge of
external switch signals.
: Switch between recording and record pause actions using the high edge of
external switch signals.
: Use the low level and high level of external switch signals for recording and
record pause respectively.
: Set to this when an external switch is not used
: Add chapter marks and indexes using the low edge of external switch sig-
nals. Also, capture still images (JPEG) to the internal memory of the DVD
recorder.
: Add chapter marks and indexes using the high edge of external switch sig-
nals. Also, capture still images (JPEG) to the internal memory of the DVD
recorder.
: Add chapter marks and indexes using the low and high edges of external
switch signals. Also, capture still images (JPEG) to the internal memory of
the DVD recorder.
: Communicate at a rate of 9600 bps
: Communicate at a rate of 19200 bps
Setup Menu
E-75