Saving An Edit List - JVC BD-X200E Bedienungsanleitung

Synchronous Recording
Editing Operations on the REMOTE CONTROL (9PIN REC/DV SLAVE) Screen (continued)
4. Starting the Record Process
Use the non-linear editor to control the DVD recorder.
● Each recording will be stored on the disc as a single title.
● Recording of video and audio to the DVD will be carried out from the In Point to the Out Point with chapters being automatically
created as specified.
Notes
● If no In Point has been set, recording will start in response to REC commands; however, since time codes are set for chapter
marks as relative values with respect to the In Point, chapters may not be created as intended. It is recommended, therefore,
that an In Point always be specified when chapters are to be created.
● When the chapter auto-create function is used, chapters will be created at specific intervals.

5. Saving an edit list

REMOTE CONTROL SCREEN ( DV SLAVE )
00:00:00:00
EXIT IN POINT OUT POINT
: : : : : :
h m s h m s
f f
1 00:00:00:00 2 00:15:00:00
4 00:25:00:00 5 00:30:00:00
7 00:40:00:00 8 00:45:00:00
CHAPTER MANUAL
ADJ 8.0 Mbps DISC REMAIN
BITRATE
EDL
TC CANCEL
EDL item
6. Ending the Record Process
EXIT item
REMOTE CONTROL SCREEN ( DV SLAVE )
00:00:00:00
EXIT IN POINT OUT POINT
: : : : : :
h m s f h m s f
1 00:00:00:00 2 00:15:00:00
4 00:25:00:00 5 00:30:00:00
7 00:40:00:00 8 00:45:00:00
CHAPTER MANUAL
ADJ BITRATE 8.0 Mbps DISC REMAIN
EDL
TC CANCEL
E-76
Edit lists can be saved on the EDL MANAGER screen of this machine. Also, edit
lists registered on the EDL MANAGER screen can be read into the REMOTE
00:10:00:00
CONTROL screen.
: : :
h m s
f
Select the EDL item on the screen, press the "Enter" key and the EDL MANAGER
3 00:20:00:00
6 00:35:00:00
screen will be displayed.
9 00:50:00:00
☞ Refer to page 69 for details on how to use the EDL MANAGER screen.
000 min
FINALIZE
If you intend to play the recorded disc on this DVD recorder or on another player,
select FINALIZE and press the SET button.
Once finalizing has been carried out, no addition recordings can be made on
00:10:00:00
the disc.
: : :
h m s f
Select the EXIT item on the screen, press the "Enter" key, and the REMOTE
3 00:20:00:00
6 00:35:00:00
CONTROL screen will disappear.
9 00:50:00:00
To remove the recorded disc from your BD-X200, press the OPEN/CLOSE button
000 min
on the front panel.
FINALIZE
FINALIZE