JVC BD-X200E Bedienungsanleitung Seite 69

2. Changing and canceling events
TC SET
Cursor
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1 : : : : : :
01 01 00 00 00 00
2
01 02 00 01 30 00 : : : : : :
3
: : : : : :
01 03 00 02 30 00 00 03 30 00
CHAPTER MANUAL TOTAL DURATION
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
TC CANCEL EDIT/END
SOURCE TIMECODE
TC CANCEL
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1 : : : : : :
01 01 00 00 00 00
2
01 02 : : : : : :
3
: : : : : : :
01 03 00 01 30 00
CHAPTER MANUAL TOTAL DURATION
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
EDIT/END
TC CANCEL
SOURCE TIMECODE
Event line is empty.
3. Setting the optimum bit rate according to the remaining space on the disc
TOTAL DURATION item
BITRATE item
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1 : : : : : :
01 01 00 00 00 00
2
01 02 00 01 30 00 : : : : : :
3
: : : : : :
01 03 00 02 30 00 00 03 30 00
CHAPTER MANUAL TOTAL DURATION
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
EDIT/END
TC CANCEL
SOURCE TIMECODE
ADJ item DISC REMAIN item
Changing the registered time code value
q Place the cursor on the column of the time code you want to change.
w Playback the VCR, and at the position you want to change enter the still
mode.
e Press the "|" key on the keyboard, or select the TC SET on the screen,
then press the "Enter" key.
ACTION MENU
● The time code is changed.
CHAPTER
CHAPTER
00
STOP
Changing the ACTION item or the MENU item
00h 03m 30s
q Place the cursor on the column of the item you want to change.
030 min
w Press the "Enter" key on the keyboard.
FINALIZE
● The current setting value is underlined.
: : :
00 03 30 00 e The setting for the item can be changed while it is underlined. Change the
setting using the cursor keys and the "Enter" key.
Canceling 1 event
q Move the cursor to the event position you want to cancel.
w Press the "DEL" key on the keyboard, or select the TC CANCEL item on
the screen, then press the "Enter" key.
● The selected event will be canceled.
Canceling all events
ACTION MENU
Press the "DEL" key on the keyboard while holding down the "SHIFT" key.
CHAPTER
● All events are canceled.
CHAPTER
00h 03m 30s
Move events down new position, to register an event in the
030 min
place vacated
FINALIZE
q Move the cursor to the position you want to move down by one place.
: : :
00 03 30 00 w Press the "INS" key on the keyboard.
● The events on and after the selected position are moved down by one
place.
e A new event can be registered in the vacant place.
This is for setting the optimum bit rate (data quantity per second) to suit the
disc remaining volume by determining the total duration for all events (total
recording time).
● The total duration for all events (total recording time) is displayed in the
TOTAL DURATION item.
● A measure of the current disc remaining time is displayed in the DISC
ACTION MENU
REMAIN item.
CHAPTER
CHAPTER
00
STOP
q To set the bit rate to suit the disc remaining time, place the cursor on the
00h 03m 30s
ADJ item on the screen, and press the "Enter" key on the keyboard.
030 min
● The set bit rate is displayed in the BITRATE item on the screen.
FINALIZE
: : :
00 03 30 00
E-67