Delta Control Panel; Lcd - Otto Bock B 600 Bedienungsanleitung

Options
12.9

Delta Control Panel

The two-piece Delta control panel can be mounted to allow angle adjustment of the
control panel.
Loosen by approx. 1 turn the adjustment screw which is located below the black cover
cap.
Now you can change the angle of the indicator / push button module.
Firmly re-tighten the screw after making adjustments.
The Delta control panel can be used together with the option "control for attendant
and table-top control".

12.10 LCD

When special controls such as chin control or blow-and-suck control are used, the
LCD module is used as indicator module.
When using the control panel, the LCD module is very helpful (fig. 35).
In the driving mode the display shows the speed level, speed and the distance
covered.
To increase the speed level, shortly press the mode button on the control panel.
The joystick is used for the drive function.
To change from driving mode to menu mode hold the mode button depressed for a
while (fig. 36). Here you can change the speed level and control additional functions
such as lights and horn.
86
Fig. 34: Control panel, swing-away to the side
B600 – Instructions for Use