Defect / Failure; Options - Otto Bock B 600 Bedienungsanleitung

11.3

Defect / Failure

A defect represents a serious failure of a system component.
After elimination of the error, the system will be re-activated by re-starting it.
A failure represents the most serious possible error status, which results in an
immediate emergency stop of the system.
Display:
Indicator Error group
Incorrect system
configuration
Higher control device
defective
If you don't manage to directly eliminate the occurring errors with the described
measures, the healthcare provider has the possibility to read the exact error code with
the hand programming device and make a better system analysis.
The errors which occurred before are saved as error history and give information on
all malfunctions which ever have occurred.
This will help to determine the further procedure of repair of the system.
12

Options

The B600 power wheelchair has been designed as a modular system.
The MCS control offers the possibility to use various electrical additional functions as
well as specially adapted input devices.
In addition, other accessory components can be added to the wheelchair.
The complete range of accessory components is listed on the Order Form and in the
Wheelchair Accessories Catalogue.
Some important options are described in the following.
B600 – Instructions for Use
The LEDs continually light up one after another accompanied
by an acoustic signal
Possible cause
On/Off module is missing
or defective,
two equal modules are
competing,
wrong input device
configurated / connected
Lost of the position
of the joystick
Options
Possible measure
Connect the
input devices,
check the plug
connection
of the modules,
restart
Check the
mechanical
mid-position and if
the joystick moves
easily / restart
79