Maintenance and Cleaning
For changing the rear direction indicators and the rear lights, unscrew the pane.
Lightly press in the lamp and turn it to the left by approx. 90°, then remove it (fig. 43).
Insert the matching lamp and turn it to the right to provide function.
Further information on the lamps used is contained in the section "Technical Data".
94
Fig. 42:
Replacing the front light
Note!
When re-inserting the panes make sure they are seated
exactly on the housing and check that the screws are firmly
tightened. Avoid that moisture can enter the lamps!
Fig. 43:
Replacing rear direction indicators and rear lamps
B600 – Instructions for Use