Delivery; Setting And Adjustment Possibilities - Otto Bock B 600 Bedienungsanleitung

Delivery

When driving onto ramps the swivel lock, which ensures effortless straight line forward
movement of the B600, is very helpful.
This swivel lock is optionally available and can also be easily retrofitted.
7 Delivery
Upon delivery by the healthcare provider the B600 is ready for use.
All settings have been made in accordance with the indications on the order form or
are made directly on site by the healthcare provider.
The B600 is adapted to the personal requirements of the individual.
Before using the wheelchair for the first time, all components of the standard
equipment (fig. 2) must be checked for completeness.
1
Fig. 2:
The functions of the individual components must be checked according to the
instructions in the sections "Setting and Adjustment Possibilities" and "Putting into
Operation". Should any problems arise please refer to the section "Status and Error
Analysis".
The tool kit provided contains one set of Allen wrenches, sizes 3 mm, 4 mm, 5 mm,
6 mm, and one open-end 13 mm spanner.
8

Setting and Adjustment Possibilities

The B600 power wheelchair offers numerous setting possibilities.
The seat height, seat width and seat angle have been set in accordance with the
indications on the customer order form and may only be changed by the healthcare
provider.
Setting of the rear wheel spring system which is included in the standard equipment
must be carried out by the healthcare provider.
60
Note!
When the B800 is not used over extended periods of time or
for dispatching the B600, the fuse must be removed!
2 3
8 7 6
Standard equipment
1 Backrest
2 Armrest
3 Joystick & control unit
4 Seat cushion
4
5 Footplate
5
6 Brake release
7 Motor & rear wheel
8 Anti-tippers
B600 – Instructions for Use