Warning - Otto Bock B 600 Bedienungsanleitung

11.1

Warning

A warning indicates a status or malfunction of individual components.
Components without error are not restricted in their function.
This means, for example, that the light function remains intact in the case that one
direction indicator has failed.
Display:
Indicator Error group
Battery warning
Temperature
warning
Impulse control
warning
Multifunction button
or On/Off button
Driving is
restricted
Input / output
module warning
Battery charger
blocking
B600 – Instructions for Use
The LEDs flash 2 times per second for a duration of 4 seconds.
In addition, 2 acoustic signals are emitted.
This process is repeated every minute or happens once when the
system is started.
Possible cause
Battery voltage too high
or too low
Overheated impulse control
(controller) or motor
Motor regulation
problem
Connection error /
Button defect
Certain seat function has
been applied (lift seat)
Motor is not connected,
overloaded motor,
output (e.g. defective
direction indicator)
Battery charger is connected
Status and Error Message
Possible Measure
Charge or discharge
depending on the battery
indicator
Reduce driving speed
/ let cool down
Restart
Check connection cable /
buttons
Bring seat in normal
position
Check connection cables /
lamp contacts
Disconnect the battery
charger after charging
77