Menu control:
Joystick to the front
Joystick to the rear
Joystick to the right
Joystick to the left
Mode button
When different input devices are used, the wheelchair will be controlled by the module
which was used to switch the B600 on.
12.11 Blow-and-Suck Control
When the blow-and-suck control is used, the drive and additional functions are
controlled by different combinations of blow and suck instructions.
In addition, the multifunction switch (MFS) is used for moving within the menu (fig. 37).
With slow driving speed, the steering position is displayed on the LCD module.
There are two types of instructions:
B600 – Instructions for Use
Fig. 35:
LCD module
Fig. 36:
Change from driving mode to menu mode
>>
go up in the menu
>>
go down in the menu
>>
select in the menu
>>
one level upward in the menu
>>
go back to driving mode
Options
87