Back - Otto Bock B 600 Bedienungsanleitung

The telescoping front frame of the B600 power wheelchair allows the wheelbase to be
adapted to the seat in use (fig. 3).
Since this setting involves a shift of the center of gravity it may only be carried out by
an authorised healthcare provider.
However the user can vary the back angle, change the armrest height and lower leg
length and disassemble the footrests and armrests themselves.
8.1

Back

The back can be adjusted to four different angle positions by pulling the release strap
which is located at the base of the back.
Once the back is in the desired position, release the strap to engage the locks (fig. 4).
B600 – Instructions for Use
Fig. 3: Telescoping front frame
Fig. 4: Release strap
Setting and Adjustment Possibilities
61