Otto Bock B 600 Bedienungsanleitung Seite 74

Putting into Operation
Before connecting the battery charger ensure the control is switched off, now connect
the battery charger to the charging receptacle (fig. 19). The charging receptacle is
integrated in the left or right lateral covering. Next, connect the battery charger to a
wall socket.
The indications on the type plate of the battery charger must be identical to the
voltage of the mains supply of your country.
Charging will start automatically.
The current charging state is indicated by the LEDs of the battery charger.
72
Note!
The warranty is void in case of damages that result from a
totally discharged battery!
Note!
When the B600 is not used over extended periods of time,
disconnect the main fuse or charge the B600 power
wheelchair once a week.
Note!
Only the battery charger provided by Otto Bock HealthCare
GmbH may be used for charging.
Note!
During battery charging, the control must be switched off.
The complete charging current will be fed into the battery.
Fig. 19: Charging receptacle
B600 – Instructions for Use