Error - Otto Bock B 600 Bedienungsanleitung

Status and Error Analysis
11.2

Error

An error affects the function of the MCS control. The system is not fully operational
until the error has been eliminated.
Display:
Indicator Error group
Battery error
Right drive motor
or brake
Left drive motor
or brake
Error of input module
Error of output module
Error of impulse control
Communication error
78
Flashing signals of the LEDs: 4 x / second
Acoustic signal: 2 x / second.
Possible cause
Battery is discharged
or overcharged
Right drive motor or
brake are not
connected,
poor contact or
cable break
Left drive motor or
brake are not
connected,
poor contact or
cable break
Joystick is not in mid-
position,
not calibrated during
system start,
defective input module
Defective connection
to the output module /
defective module
Error in the controller
Module is not
connected,
defective connection
Possible measure
Charge or discharge
depending on the
battery indicator
Check motor cable
and plug connection
on the controller
Check motor cable
and plug connection
on the controller
Check the
mechanical mid-
position and that the
joystick moves
easily / restart
Check plug contact for
firm seat / restart
Check plug contacts
for firm seat
/ restart
Check plug contacts
for firm seat
/ restart
B600 – Instructions for Use