Important Safeguards For Electrical Appliances - Gastroback DESIGN BROTBACKAUTOMAT ADVANCED Bedienungsanleitung

• Do not fill in more dough than 1000 g in total. Otherwise ingredients
or dough may run out of the bread pan and reach the hot heating ele-
ments, causing overheating, fire and/or electric shock.
exterior of the bread pan is completely clean and dry before placing it in the
heating compartment. Always wipe off spilled liquids immediately. If liquids have
run out or are spilled on the housing, immediately unplug the appliance and clean
the appliance (see: "Care and Cleaning").
• Always unplug the appliance, and wait until the motor comes to a standstill,
before assembling or disassembling any parts (e.g. bread pan). Additionally lea-
ve the appliance cool down, before moving, or cleaning the appliance. Always
unplug the appliance, when not in use. Always hold the housing at both sides
near the bottom for moving the appliance. Do not hold the appliance at the lid, lid
handle, bread pan handle, or power cord for moving the appliance. Do not place
any hard and/or heavy foreign objects on or in the appliance or any part of it.
• Do not use any corrosive chemicals, abrasive cleaners, or cleaning pads (e.g.
bleach, oven cleaner, metal scouring pads) for cleaning to avoid damage to the
surfaces.
• Do not place the appliance, or any part of it, or power cord in an auto-
matic dishwasher.
• Do not leave any food dry on the appliance. Always clean the appliance after
each use to prevent accumulation of baked-on foods (see "Care and Cleaning").
Always keep the appliance and its parts, where it is clean.

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

The appliance is heated electrically. Place the appliance near a suitable wall power
socket to connect the appliance directly to a protected mains power supply with
protective conductor (earth/ground) connected properly. Ensure that the voltage
rating of your mains power supply corresponds to the voltage requirements of the
appliance (230 V, 50 Hz, AC, rated for at least 10 A) to avoid interference with
other appliances.
The installation of a residual current operated circuit breaker (r.c.c.b.) with a maxi-
mum rated residual operating current of 30 mA in the supplying electrical circuit is
strongly recommended. If in doubt, contact your electrician for further information.
In various foreign countries, the specifications for power supplies are subject to
incompatible norms. Therefore it is possible that power supplies in foreign countries
do not meet the requirements for safe operation of the appliance. Thus, before ope-
rating the appliance abroad, ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external timer, extension cord, or
76
Ensure that the