VEVOR RW630 Originalanleitung Seite 15

Product mobility
When the product needs to be moved, first move the seat cushion
component (K) to the front end (to prevent the seat cushion component
from quickly falling and damaging the product when folded), lift the end of
the guide rail, and the product can be moved to the desired position.
K
Product folding
Fold up the electronic watch assembly (B), push the seat cushion
assembly (K) to the end, hold the rear connecting plate assembly (O) with
one hand, and hold the rear track with the other hand. Slowly pull it up and
stand it on the floor. Place both hands on the left/right track assembly (G/H)
and press it back appropriately to lift the front foot pad (16) off the ground.
Then slowly push it forward to move the product in a folded state (note that
the seat cushion assembly (K) should not touch the ground).
B
O
K
O
H
G/H
G
K
16
14