VEVOR RW630 Originalanleitung Seite 14

STEP 7
1. Remove the water tank plug (29) from the upper water tank.
2. Inject water according to Figure 1 Insert the water pump (N) into the
water tank, and then use the water pump (N) and water bucket to fill the
water tank with water. Measure the water level in the water tank by
referring to the digital markers on the side of the tank.
3. Pump water according to Figure 2 Place a water bucket next to the
machine and use a water pump (N) to draw water from the water tank into
the bucket.
Insert the water tank plug (29) into the upper water tank, dry the water
droplets on and around the machine with a dry cloth, and complete the
pumping process.
44
29
6
5
WATER LEVEL
4
R E S I S T A N C E
3
2
1
Fig 1
44
MAX FILL
RESIS.
MIN. FILL
13
Fig 2
29