VEVOR RW630 Originalanleitung Seite 11

STEP 2
Assemble the rear left/right track components (G/H) to the corresponding
positions on the rear connecting plate assembly (O). Pre lock it on top with
an internal hexagonal flat head screw (60) and a hexagonal cap nut (76).
STEP 3
Assemble the main frame assembly (A) to the corresponding position on
the front rails (E, F) and pre lock it with hexagon socket countersunk
screws (48). Then assemble the front foot tube assembly (C) to the
corresponding position on the front rails (E, F), and pre lock it with the
hexagon socket head screw (43) and hexagon socket head screw (83).
Finally, tighten all the screws and nuts in the above steps.
C
43
O
60
A
67
83
E
76
76
G
48
D
83
F
10
76# M8*16 4PCS
60# M8*40*15*S5 4PCS
47# S5 1PCS
45# S13-14-17 1PCS
60
H
48# M6*12*S4
67# M8*H7.5
43# M8*25*S5
83# M8*45*15*S5 4PCS
46# 25*60*4 S4
47# 30*80*5 S5
45# S13-14-17
4PCS
4PCS
2PCS
1PCS
1PCS
1PCS