Changing The Engine Oil - Stihl Rt 4082.1 Gebrauchsanleitung

English
► Turn the screws (1) 90° counterclockwise.
► Fold the storage compartment (2) upward.
The storage compartment is open.
15.3.2 Closing the storage compartment
► Place the ride-on mower on a level surface.
► Shut off the engine,
► Engage the parking brake,
► Remove the ignition key and store it securely.
► Move the driver's seat to its forward position or
fold it forward, 8.1.
► Fold the storage compartment (1) downward.
► Turn the screws (2) 90° clockwise.
The storage compartment is closed.
15.4

Changing the engine oil

► Place the ride-on mower on a level surface.
► Shut off the engine,
► Engage the parking brake,
► Remove the ignition key and store it securely.
► Allow the ride-on mower to cool down.
► Remove the discharge chute,
► Open the storage compartment,
► Change the engine oil as described in the
User Manual for the engine.
► Close the storage compartment,
► Attach the discharge chute,
74
9.2.
11.5.1.
9.2.
11.5.1.
6.1.2.
15.3.1.
15.3.2.
6.1.1.
15.5 Removing and mounting the
wheels
15.5.1 Easing the pressure on the wheels
To ease the pressure on the front wheels
► Place the ride-on mower on a level surface.
► Shut off the engine,
► Engage the parking brake,
► Remove the ignition key and store it securely.
► Secure the ride-on mower so that it cannot roll
away.
► Use a suitable lifting jack to lift the ride-on
mower at the front. Engage the help of another
person if necessary.
► Push a non-skid support of sufficient load-
bearing capacity and with a height of at least
200 mm (1) under the front axle (2).
► Support the ride-on mower carefully on the
support.
To ease the pressure on the rear wheels
► Place the ride-on mower on a level surface.
► Shut off the engine,
► Engage the parking brake,
► Remove the ignition key and store it securely.
► Secure the ride-on mower so that it cannot roll
away.
► Lift the ride-on mower at the rear with a suita‐
ble lifting jack. Engage the help of another per‐
son if necessary.
► Push a non-skid support of sufficient load-
bearing capacity and with a height of at least
120 mm (1) under the rear panel (2).
► Carefully prop up the ride-on mower on the
support.
15 Maintenance
9.2.
11.5.1.
9.2.
11.5.1.
0478-193-9806-A