Emptying The Grass Catcher Box - Stihl Rt 4082.1 Gebrauchsanleitung

English
► Select the forward direction of travel,
11.4.3.
► Press the mowing deck switch for at least
1 second.
This engages the blades.
To mow in reverse:
► Select the reverse direction of travel,
11.4.3.
► Press the safety switch for mowing in reverse.
► Press the mowing deck switch for at least
1 second.
This engages the blades.
11.7.2.2 Disengaging the mowing deck
► Select the highest cutting height,
► Press the mowing deck switch for at least
1 second.
After 5 seconds, the blades come to a standstill.
The engine continues to run.
11.7.3 Enabling and disabling automatic dis‐
engagement
11.7.3.1 Activating the automatic disengage‐
ment
The ride-on mower can be adjusted so that the
blades automatically disengage when the grass
catcher box is full. This setting prevents the dis‐
charge chute from becoming clogged. The selec‐
ted setting remains active until the user changes
it.
► Shut off the engine,
► Turn the ignition key to the "Ignition on" posi‐
tion.
The ride-on mower performs a self-diagnosis.
► Select the forward direction of travel,
11.4.3.
► Press the safety switch for mowing in reverse
and the gas pedal at the same time for 5 sec‐
onds.
A short beep sounds. The automatic disen‐
gagement is activated.
11.7.3.2 Disabling automatic disengagement
Automatic disengagement can be disabled as
follows:
► Shut off the engine,
► Turn the ignition key to the "Ignition on" posi‐
tion.
The ride-on mower performs a self-diagnosis.
► Select the forward direction of travel,
11.4.3.
► Press the safety switch for mowing in reverse
and the gas pedal simultaneously for 5 sec‐
onds.
70
11.6.
9.2.
9.2.
11 Working with the ride-on mower
You will hear 3 short beeps. Automatic disen‐
gagement is now disabled.
11.8

Emptying the grass catcher box

The grass catcher box is equipped with a level
sensor. When the blades are engaged and the
grass catcher box is full, a steady beep sounds.
The level sensor is adjustable,
► Place the ride-on mower on a level surface.
► Disengage the blades,
The blades must not turn. The steady beep
stops.
► Select the highest cutting height,
► Engage the parking brake or press and hold
the brake.
► Remain seated on the driver's seat.
► Pull the lever for the grass catcher box (1)
upward.
► Pull the lever for the grass catcher box (1) for‐
ward.
The grass catcher box (2) swings upward, and
the grass clippings fall out.
► Carefully retract the lever for the grass catcher
box (1).
The grass catcher box engages securely into
the rear panel.
► Press down the lever for the grass catcher
box (1).
The lever for the grass catcher box is located
in the starting position.
11.9 Adjusting the level sensor
The grass catcher box is equipped with an
adjustable level sensor. The level sensor indi‐
cates when it is time to empty the grass catcher
box and is equipped with 6 positions.
Adjusting the level sensor
► Disengage the blades,
The blades must not turn.
► Bring the ride-on mower to a standstill.
► Place the ride-on mower on a level surface.
► Empty the grass catcher box,
► Shut off the engine,
► Engage the parking brake,
11.9.
11.7.2.2.
11.6.
11.7.2.2.
11.8.
9.2.
11.5.1.
0478-193-9806-A