Stihl RT 4082.1 Gebrauchsanleitung Seite 61

6 Assembling the ride-on mower
► Turn the screw plug (1) 90° counterclockwise.
► Pull the rear V-belt cover (2) forward and
remove.
Detaching the V-belt
► Select cutting height 3,
► Use a suitable pipe section (2) to press the V-
belt tensioner lever (1) forward and hold it
there.
► Remove the V-belt (3) from the V-belt pul‐
ley (4).
► Carefully release the V-belt tensioner lever (1).
0478-193-9806-A
11.6.
Detaching the mowing deck at the rear
► Remove the cotter pin (1) from the retaining
pin (2).
► Lift and hold the mowing deck.
► Detach and remove the retaining pin (2).
► Remove the cotter pin (4) from the retaining
pin (5).
► Lift and hold the mowing deck.
► Detach and remove the retaining pin (5).
► Carefully set down the mowing deck.
Detaching the mowing deck at the front
► Push the mowing deck (1) parallel toward the
front.
► Detach the mowing deck (1) at the front mow‐
ing deck mounting (2).
Removing the mowing deck
► Select cutting height 6,
► Pull the mowing deck (1) out to the right side
from under the ride-on mower.
English
11.6.
61