Device Addresses; Assignment - Maico Rv 2 Rls 45 K Installations- Und Inbetriebnahmeanleitung

30 RV / CPP devices settings menu (specialist installers)

30.4 Device addresses

Menu for manually entering or changing the
device addresses. New units can be added or
removed.
After selecting a menu line, the associated device
address can be overwritten with another one. This
is required, for example, for a manual configura-
tion for mixed systems.
To do this, the device address (3-digit number) on
the ventilation device must be selected from the
list of 150 bus addresses and confirmed. The ad-
dresses must match and must not be used more
than once.
A successful address configuration is confirmed
with Executed. If the address configuration fails,
the message The address is already assigned
appears.

30.5 Assignment

Menu for manually entering or changing the ex-
haust air or supply air group assignment. New
devices can be assigned accordingly.
With standard assignment, the devices are al-
ternately assigned to a supply air or exhaust air
group, see also chapter Automatic search
[} 94].
Recommendation: Always use an equal number
of supply air and exhaust air units.
91