1 Infopool: Further instructions
1 Infopool: Further instructions
These instructions contain important informa-
tion for the specialist installer on installing
and commissioning the RV 2 ventilation units
and on the various setting options.
The specialist installer receives information on
installing the room air control system, sensors,
power units, commissioning the ventilation sys-
tem, information on the commissioning software
and troubleshooting. The connection options on
the bus system and on the 230 V input of the
RLS 45 K control unit are also shown.
Observe the supplementary safety instruc-
tions for PushPull ventilation units with im-
portant information for operators and spe-
cialist installers.
Commissioning software (Windows)
Commissioning software for RV 2 ventilation units
with RLS 45 K controllers. Can also be used for
mixed systems with PP 45 or PPB 30 ventilation
units.
Operating instructions for RV 2
Information on operation with the room air control,
functional descriptions and information on the
ventilation system settings.
Installation instructions for RV 2 pre-
installation kit
Information on installation preparations and in-
stallation of the mounting sleeve during the shell
construction phase.
54
Installation instructions for RV 2 VS + RV 2 VS
90E renovation pre-installation kit
Information on installation preparations and in-
stallation of the serial renovation pre-installation
kit during the shell construction phase (mounting
sleeve, 90° deflection unit, external covers).
Installation instructions for RV 2 final
installation kit
Information on final installation with installation
and electrical connection of the slide-in module
and installation of the internal cover.
Installation instructions for RV 2 external
cover
Information on installation of the RV 2 external
cover on the exterior wall.
Installation instructions for accessories: power
unit, EnOcean module, sensors
Information on fitting RV 2 accessories.
2 Safety
Read these instructions and the safety
instructions for PushPull ventilation
units carefully before installation and
use. Follow the instructions. Installation
only permissible when carried out by
trained specialists, electrical connec-
tion only permissible when carried out
by qualified electricians.
Safety instructions for PushPull ventila-
tion units PP 45 / PPB 30 / RV 2 / CPP
60