Commissioning Software; System Requirements; Connect Notebook, Load Commissioning Software; Commissioning Software: Start Menu - Maico Rv 2 Rls 45 K Installations- Und Inbetriebnahmeanleitung

COMMISSIONING SOFTWARE

COMMISSIONING SOFTWARE

19 System requirements

Minimum requirements for commissioning
software
• PC with Internet access, processor with 1 GHz,
2 GB RAM, 3 GB free hard disc space, USB
2.0, LAN-100 MBit/sec., USB connection.
• Microsoft Windows 10 and .Net Frame-
work 4.8. (Windows® is a trademark of Mi-
crosoft Corporation, USA).
• Not permitted for other operating systems, e.g.
for Mac OS (Mac OS is a trademark of Apple
Inc., USA).
• To download the commissioning software, see
chapter 1 [} 54].
20 Connect notebook, load
commissioning software
1. Download the commissioning software to a
PC or notebook.
2. Carefully remove the frame of the RLS 45 K.
3. Connect the PC/notebook to the Micro USB
interface of the RLS 45 K.
4. Call up the commissioning software.
5. Press Establish connection via USB. The
parameters menu appears.
6. Configure the ventilation system and save the
parameter settings.
80
21 Commissioning software:
Start menu
After the program start the connection is activated
by mouse click. The following standard display
appears:
• Current operating mode: Heat recovery or
cross-ventilation
• Current ventilation level: Off, ventilation levels
1 to 5, intermittent ventilation or night time
• Faults: Visible when fault is present
• Query: Shows current system values and sys-
tem statuses for the user.
• Settings: Setting options for the user such as
luminosity of the LEDs, remaining time until fil-
ter change, automatic mode etc.
• Instructions: Information/PDF instructions for
the user