coldline VISION W5S Bedienungs- Und Wartungsanleitungen Seite 66

11.6 ALARM LOG
From the main menu by pressing on UTILITIES>ALARM LOG, you can view the alarm history selecting to
view the alarms recorded in the last week, in the last month, or all of them.
The ALARM LOG allows you to view the various alarms recorded with their start and end dates.
Pressing on the single alarm will open the alarm summary screen, where some information is shown.
12.0 SETTINGS
12.1 LANGUAGE
See par. 5.1
Sets the system language from those displayed
12.2 TIME ZONE
See par. 5.3
If Vision is not connected to Cosmo, it allows you to manually set your time zone, in order to allow the correct
recording of HACCP events, alarms and automatic updating of summer time.
12.3 DATE/TIME
See par. 5.2
If Vision is not connected to Cosmo it allows you to manually set the local date and time.
12.4 COSMO
See par. 5.4
66
The SETTINGS menu allows you to change the LANGUAGE, TIME ZONE, DATE and
TIME, configure COSMO, access the SERVICE menu (password protected),
enable/disable pre-cooling or pre-heating and activate the "COLOUR MODE".