coldline VISION W5S Bedienungs- Und Wartungsanleitungen Seite 51

5.0 START
5.1 LANGUAGE SETTING
5.2 SETTING DATE AND TIME
Before connecting the appliance please read the "Installation" section
Connect the appliance to the mains. The display shows the system loading
waiting image.
The initial start-up takes about 2 minutes during which time the system
loads the program and runs a self-test.
The first time you start the unit up, you will be prompted to set the language,
date, time and time zone. Vision is equipped with a Wi-fi connection that allows
connection to the Cosmo system, updating the software and remote control of
the appliance via the app.
Download the application by scanning the QR code.
Play Store
The first time you turn on your appliance you are prompted to select a language.
After touching the screen the save page will be displayed for 2 seconds.
After 5 minutes of inactivity the screen switches to energy-saving mode, showing
the date and time. You can make your selection again by simply tapping on the
screen.
To change your language, select from the main menu Settings > Language.
By connecting Vision to Cosmo, the device will automatically synchronize dates
and times, if it is not possible to connect to Cosmo, you can set the date and
time manually.
To manually set the date and time, access the Settings menu
Date/Time
Set date and time using the
Tap the SAVE button to store your settings; the display will show the save page
for 2 seconds.
Apple Store
and buttons.
and select
51