KKT KOLBE IND800DRAFT Benutzerhandbuch Seite 201

• Insert the appliance into the prepared cut-out
in the worktop as shown in the following illustration.
Make sure that it sits stably.
 N otes:
• There are ventilation openings on the outside of the hob.
When inserting the hob, make sure that they are not
blocked by the worktop!
• When inserting the hob, make sure that its connection
cable cannot be crushed, bent or twisted!
• If it is necessary to drain liquids from the overflow con-
tainer, proceed as described in "Cleaning the inside of the
appliance".
R
R
Mounting and Installation
F Front
F
R Rear
F
97