KKT KOLBE IND800DRAFT Benutzerhandbuch Seite 192

Mounting and Installation
Assembling the extractor fan and hob
• Fit the wide sealing frame on the opening
on the top of the extractor hood (1).
• Make sure that the cooker
hood communication cable
is in the appropriate holder
(2).
• Hold the extractor unit at the appropriate
distance from the hob and plug the cable
connector into the appropriate connection
on the hob (3.1).
• Place the extractor unit with its top on the
underside of the hob so that the spacers
sit in the corresponding recesses (3.2).
88
3.2
3.1
2
1
3.2