Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Secure the extractor fan
to the hob
with the M5 screws.
9.5 Connecting the hob to the mains
WARNING!
Risk of electric shock!
There is a risk of fatal electric shock if the appliance
is connected by unqualified persons!
This hob may only be installed/connected and earthed
by a certified electrician in accordance with the applicable regu-
lations and standards!
Important notes on connection to the mains
• The installer must ensure that an easily accessible
all-pole circuit breaker (fuse) with a contact gap of at least 3 mm
is integrated into the appliance's circuit,
which complies with the applicable regulations
and ensures complete disconnection of the appliance
from the power supply in an emergency.
The earth wire must not be interrupted by the fuse in the process.
• Use the supplied mains cable for installation and only have it replaced
with one of the same type if necessary.
• The cable must be laid in such a way that it cannot be kinked, crushed
or twisted and its temperature never exceeds 75˚C.
• Do not use adapters, reducers or branching devices to connect
the hob to the mains, as these may cause overheating and fire.
Mounting and Installation
89
Werbung
