Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning the metal grease filter
ATTENTION!
Risk of damage!
To avoid damage to the filter, do not use any aggressive,
acidic or alkaline (pH value over 7) cleaning agents
and no sharp or pointed cleaning utensils!
Clean the metal grease filter every 2-3 weeks,
depending on how often the extractor fan is used.
Proceed as follows (several times if necessary):
Manual cleaning
• Soak the metal filter well in hot soapy water.
• Then clean it with a soft brush.
Be careful not to damage the metal mesh of the filter.
• Rinse it well with hot water afterwards.
• Let the filter dry well after cleaning.
Cleaning in the dishwasher
• Soak heavily soiled metal filters well in hot rinse water
also before cleaning in the dishwasher.
• Rinse the metal filter separately from the dishes
to avoid possible grease deposits on the dishes
and accumulation of food residues in the mesh of the filter.
• Place the filter loosely in the dishwasher without it being clamped,
preferably with the filter side facing downwards.
• Select a temperature setting of 55 - 70 °C.
• Make sure that the filter is dry before you put it back in.
Cleaning the extractor grille
Clean the extractor grille regularly by hand as needed.
Proceed in the same way as for manual cleaning of the
metal grease filter.
Cleaning and Maintenance
69
Werbung
