Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
A malfunction occurs /
An error code is dis-
played
8.2 Error codes
Error
code
Simultaneous touching
of several keys
Temperature sensor failure /
open circuit
Temperature sensor failure /
short circuit
Temperature sensor failure
IGBT temperature sensor failure /
open circuit
IGBT temperature sensor failure /
short circuit
Possible cause
Fluctuations in
the power supply
system
Technical error /
Code meaning see
following table
Meaning
Whattodo
Disconnect the hob from the power
supply for at least 12 hours
(switch off the fuse) to reset the
electronics and then switch it on
again.
Make sure that the mains voltage
is 230 volts (if this is not the case,
contact your energy supplier).
Note down the error code,
disconnect the hob from the power
supply and contact a certified elec-
trician.
Whattodo
Operate the keys one at a time.
Make sure that the control panel
is clean and dry.
Contact a suitably qualified
electrician.
Troubleshooting
77
Werbung
