KKT KOLBE IND800DRAFT Benutzerhandbuch Seite 196

Mounting and Installation
Removing the activated carbon filter
for exhaust air operation
WARNING!
Danger to life!
Incorrect installation can result in many risks,
including life-threatening hazards,
during extract air operation!
It is essential to observe the relevant instructions
and requirements, especially at the beginning
of this chapter!
For extract air operation no active charcoal filter is required.
To remove it, proceed as follows:
• After removing the cover flap,
remove both components
of the active charcoal filter
using the tabs located on it.
• The cover flap is not required
for exhaust air operation.
Keep it for possible later use
in recirculation mode.
92