Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
Problem
The sensor keys are
difficult to operate.
The cookware is not
heated / The heating
process stops
and the
icon is dis-
played.
The display works,
but the cookware is
not heated.
The heating process
takes an unusually
long time.
The cooking zones
switch off and on
during operation
A cooking zone
switches off unex-
pectedly
74
Possible cause
There is moisture
or soiling on the
control panel
The keys are not
operated correctly.
The cookware is
not suitable for
induction
or is not recog-
nised as such.
The overheating
protection has
been triggered.
Unsuitable cook-
ware is used
Fluctuations in the
power grid
The heating pro-
cess is carried out
in intervals
The auto switch-off
of the cooking zone
has been activated
Whattodo
Make sure that the control panel is
completely clean and dry.
Note that a thin film of moisture may
not be visible.
Touch only one key at a time with
the ball of your finger for at least 1
second (see corresponding section).
Use cookware suitable for induction
in a size suitable for the desired cook-
ing zone and position it correctly.
See "Suitable cookware and its use".
See "The hob switches off
unexpectedly".
Use cookware with a high proportion
of magnetic particles (see "Suitable
cookware and its use").
Fluctuations of as little as 10 volts
in the mains supply can lead
to a much longer cooking time.
This is by design
and is not a malfunction.
Switch the cooking zone on again
if necessary.
For time cooking zone operation
(see auto shut-off table under "Fea-
ture...").
Werbung
