KKT KOLBE IND800DRAFT Benutzerhandbuch Seite 153

5.5 The flex zone function
The front and rear cooking zone on the left and right
(cooking zones 1+2 / 3+4) form a flex zone each.
A flex Zone consists of two independent induction zones
that can be connected together as one large zone.
If, during operation as one large zone, the cookware is moved
from the front part to the rear part (or vice versa) within the flexible
area, the new position is automatically detected;
the power level of the zone on which the cookware was originally
placed is maintained and the part not covered by the cookware
is automatically switched off after 8 seconds.
Importantnoteonplacementontheflexzone
If the diameter of the cookware is less than 21cm,
place it on the front or rear cooking zone.
Always ensure that the cookware is placed centrally on the
flex zone
or in the case of 2 pots / pans, that it is evenly distributed.
Operation, Setting and Use
49