KRAUSE ClimTec Bedienungsanleitung Seite 34

63
Base frame with first and second frame element
Step 7
Climbing half standing down in the
hatch, give the railing bars up and
assemble the railing bars front and
behind in the 1st and 3rd rung from
the top.
Secure all bars with safety sets.
Climb only then on the platform.
Step 8
Securing of
Mount one vertical frame
scaffold with
(1.0 x 0.65 m) to the other
scaffold clips
and secure them with
scaffold clips.
Take the pre-assembled
vertical frames which
are handed up to you,
and insert the vertical
sections into the already
mounted vertical frames.
Secure them with scaf-
fold clip.
Step 9
Take the board which is
handed up to you.
Attach the board at the 5th
rung from the top.
Secure the board with
safety sets.
Step 10
Take the two diagonal braces
which are handed up to you.
Secure the two vertical frames
by mounting the diagonal braces
crosswise between the 3rd and
7th rung and between the 1st
and 5th rung respectively, coun-
ted from the bottom board.
Secure all braces with safety
sets.
Take all remaining scaffold parts
handed up to you (4 railing bars,
2 longitudinal boards, 2 cross
boards and 1 railing brace) and
place them temporarily on the
board.
Base frame with first and second frame element
64