KRAUSE ClimTec Bedienungsanleitung Seite 27

49
Step 3
Connect the two base
frames with the diagonal
brace, attaching it to the
lowest rung on one side
and to the 5th rung on the
other side.
IMPORTANT:
Ensure that the braces
are properly secured to
the rungs by mounting the
M 5 x 65 mm
securing kits as shown in
the picture. Tighten the
wing nut.
Secure all railing and
diagonal braces as well
as the board with
safety sets!
Base scaffold
Step 4
Attach the board at the
4th rung.
Secure the board with
safety sets.
This picture shows the
completely mounted base
scaffold.
With this package, the
covered platform must not
be higher than 1 m.
M 5 x 85 mm
Base scaffold
50