KRAUSE ClimTec Bedienungsanleitung Seite 32

4.4 Base frame with first and second frame element
To erect a scaffold with two frame elements, you need a base scaffold (prod. no.
710116 / 600004), the parts of the 1
and the parts of the 2 extension element. The pack of the 2
nd
(prod. no. 710154 / 600028) consists of the following parts:
1
x5
Item Description
1 Vertical frame 2.00 x 0.65 m
2 Stabilizing set
3 Board with hatch
4 Diagonal brace, approx. 1.89 m
5 Railing bar, approx. 1.59 m
6 Safety set M5 x 65 mm
7 Safety set M5 x 85 mm
8 Scaffold clip, Ø 8 mm
59
Base frame with first and second frame element
st extension element (prod. no. 710130 / 600011)
extension element
nd
3
2
4
7
6
8
x2 x18
Prod. no. Quantity
715012
714305
711007
712707
712806
718860
718877
714411
Step-by-step installation instructions for the base
scaffold and the first and second extension elements
5
Step 1
Insert the stabilizer bars
into the base frame and
secure each of them with 2
screw kits
(prod. no. 718891).
The maximum extension
of the girder is approx. 350
mm.
Step 2
Connect the two base
frames with two railing bars.
Secure the bars with safety
sets.
2
1
NOTE:
1 The scaffold shown here
is stabilised with ballast
4
weights. Such ballasts
4
are necessary to provide
free-standing scaffolds
18
with the necessary stability!
2 Adhere to the instructions
for ballasts
5
on page 67!
M 5 x 65 mm
Base scaffold with first and second extension element
60