KRAUSE ClimTec Bedienungsanleitung Seite 29

Securing of
scaffold with
scaffold clips
53
Base scaffold with first extension element
Step 3
Connect the two base
frames with the diagonal
brace, attaching it to the
lowest rung on one side
and to the 5th rung on the
other side.
Step 4
Insert the vertical frame (2.0 x 0.65 m)
into the base frame and secure it with
scaffold clips.
Stabilise the base frame with a diago-
nal brace attached to the 6th rung on
the one side and the 10th rung on the
other side.
Secure the diagonal braces with safety
sets.
Step 5
Mount one vertical frame (1.0 x
0.65 m) to the other and secure
them with scaffold clips.
Step 6
Insert the pre-assembled ver-
tical frame into the base frame
and secure the connection with
scaffold clips.
NOTE:
For the following steps 2
persons are required!
Base scaffold with first extension element
Securing of
scaffold with
scaffold clips
54