KRAUSE ClimTec Bedienungsanleitung Seite 28

4.3 Base scaffold with first extension element
To erect a scaffold with one first extension element, you need a base scaffold
(prod. no. 710116 / 600004) described in the previous chapter and the component
parts of the 1 extension element (prod. no. 710130 / 600011). The pack of the 1st
st
extension element (prod. no. 710130 / 600011) consists of the following parts:
2
1
x7
Item Description
1 Vertical frame 2.00 x 0.65 m
2 Vertical frame 1.00 x 0.65 m
Stabilizing set
3
4 Cross board
5 Longitudinal board
6 Diagonal brace, approx. 1.89 m
7 Railing brace, approx. 1.77 m
8 Railing bar, approx. 1.59 m
9 Safety set M5 x 65 mm
10 Scaffold clip, Ø 8 mm
51
Base scaffold with first extension element
3 4
5
6
10
9
x16
Prod. no. Quantity
715012 1
715029 2
714305 1
713506 2
713001 2
712707 1
712813 1
712806 5
718860 16
714411 7
Step-by-step installation instructions for the base
scaffold with first extension element
7
Step 1
Insert the stabilizer bars into
the base frame and secure
each of them with 2 screw kits
(prod. no. 718891).
The maximum extension of the
girder is approx. 350 mm.
8
Step 2
Connect the two base
frames with two railing
bars.
M 5 x 65 mm
Base scaffold with first extension element
52